Package Details:
ENDURA BREEZEWOOD BATON SLIDING DOOR with LIFT OUT PANEL TOP
Product Number: EWBATONSD4WLOP
Door Size: 51-1/2" wide x 96" (or 84")
Opening Size: 48" wide x 97-3/8" (or 85-3/8")
The Endura material is a dense PVC plastic product which is solid. Endura is not hollow and the material is not vinyl. The Endura panel is 1-1/2" thick and 3/4" in the non "x" areas.
Endura-panels have excellent insulation properties, impervious to water, mold, mildew and WILL NOT warp, rot or split... guaranteed! Armour offers products built with the Endura-panel material and NO RUST aluminum framing to create a product that will outlast traditional steel and lumber products. Standard and custom sizes are available upon request. Endura-panels are available in white and do not require paint or stain. Painting NOT recommended.
- COMPLETELY ASSEMBLED
- Baton Endura Design Included in Door Bottom
- No Assembly Required
- All Aluminum - no rust
- Heavy Gauge Aluminum used Throughout
- Concealed Weldments - Clean Appearance
- Increase Ventilation
- All Hardware & Fasteners Included
- Free Instructions for Installation
Armour's Breezewood Baton Sliding Stall Door with Lift Out Panel Top is manufactured with conservatism and functionality in mind. The Lift Out Panel is a great option for allowing stall inhabitants to peruse the aisle for longer periods of time, but may require to be retained at a moments notice. One Lift Out Panel can be used in multiple doors of the same size, therefore keeping one on hand in the aisle may be an option. Round schedule 40 pickets of 1" diameter are used on door top with a 3” between bar spacing also known as 4” on center. The Lift Out Panel Top is released by lifting the grille section and pulling it toward the aisle. Reverse the maneuver to re-install. The Lift Out Panel Top coupled with the Baton design bottom is an inexpensive way to provide additional ventilation to your horse's stall while obtaining a fresh new interior look and increasing equine interaction. Door arrives completely assembled with the hardware and endura panel! Heavy gauge, all aluminum, no rust door frame surrounds the lower 48" endura panel on all four edges. Breezewood endura panels are 1-1/2" thick ventilated panels. Counter sunk screw placements for a scratch free stall front wall. Heavy gauge non-rusting ALUMINUM is used throughout the entire door structure (except the lower endura panel). Full height 96" (or 84") vertical square tubing on both sides of door are added for rigidity and strength and reinforced header channels. Schedule 40 round pickets of 1" diameter are used to create the Bar Top and Lift Out Panel. All aluminum used is at least 1/8" quality thickness, no thin 1/16" material is used in construction of these doors. Concealed weldments throughout door structure for the cleanest looking appearance in the horse stall industry! Installation instructions and all the necessary hardware is included: one self cleaning, galvanized, overhead round 96" track, two ball bearing trolleys, two custom aluminum stops, one zinc plated, Super Latch, and one adjustable heavy duty, stay roller plus fasteners for lumber installations.
Creative Options: Breezewood panels can be ordered with solid back panel for a non-ventilated door option. Breezewood panels can also be manufactured with your own design, horse or farm name on door. Double Dutch, Tack, Feed or Storage room doors can be ordered with the same Breezewood design, solid or ventilated, to accomplish the same overall barn appearance.
Share this page, click URL below to copy link:
https://www.armourhorsestalls.com/product/sliding-stall-door-endura-baton-lift-out-top/