Package Details:
Coolbreeze Half Dutch with Scuff Panel
Product Number: ABCWSPHD1
48" wide x 48" high
The Coolbreeze Miniature Gate with Scuff Panel arrives fully assembled with 1" round pickets and a 1" between bar spacing on the top half and the best T&G #1 Southern Yellow Pine lumber installed in the lower half. Perfect for miniatures or foals because of the added airflow and visibility to the lower portion of the stall. The gate panel is completely welded as one piece and the appearance is weld free. The lower 24" lumber panel is secured together by glue and counter-sunk wood screws in rear of gate fascia. After curing, the lumber is fitted in to the lower gate frame and moisture drainage vents are installed. It is recommended to paint or stain over the lower lumber panel once the gate is installed. Two 6" Stainless Steel Tee Hinges, and one Super brand latch and all the installation fasteners for lumber are included with each gate purchased. The gate size is 48" wide x 48" height and a finished opening width of 48-1/2" width is required for installation.
- Completely Assembled Miniature Horse Gates
- Nothing to put Together, No Loose Jangling Pieces
- Instant Ventilation to Miniature Horses’ Stalls
- Heavy Gauge Non-Rusting Aluminum used Throughout Gate Structure
- Aluminum Vertical Square Tubing on Both Sides for Rigidity and Strength
- Through Punched Picket Holes at Ultra 1000, 1" Between Bar Spacing for Foal's or Mini's
- Schedule 40 Round Aluminum Pickets 1" in Diameter
- Concealed Weldments (at picket channel area underside)
- Your Choice of Vertical or Horizontal Tongue & Groove Lumber Panel in the lower 24" of Mini Gate
- Vertical T&G Panels will be sent as default if horizontal placement is not requested at time of ordering
- Counter Sunk Screw Placements on inside of Lumber Panel
- Surrounded Lumber Fascia (Channels protect all four edges of lumber panels.)
- Zinc Plated Superlatch and Latch Receiver Plates
- 6" Stainless Steel T-hinges
- Stainless steel fasteners for installation into lumber structures (Concrete anchors not provided)
- Stainless steel hook & eye set also available (additional cost)
- Surrounded Lumber Fascias (Channels protect all four edges of lumber panels.)
- Painting or staining door lumber portion is recommended.
Share this page, click URL below to copy link:
https://www.armourhorsestalls.com/product/half-gate-coolbreeze-with-scuff-48x48/