Gossip Gate Wind Jump 47-1/2″ w x 60″ h

Windsor Jumping Horse Zephyr-Top Gossip Gate

Product Number: 311JUMPGG3
Sizes: 47-1/2" width x 60" height

Also available in 48" width x 60" height at no additional cost to accommodate a 48-1/2" opening

The Windsor Jumping Horse Gossip Gate arrives fully assembled with the Windsor Jumping Horse fascia lumber installed into the handcrafted 1/8" heavy duty aluminum frame. SILHOUETTES are manufactured from 3/4" thick stock in one piece. The gossip gate frame is assembled with two 60" height capped channel posts which are secured to the zephyr style top at several points. The triple bar zephyr style gossip top is 12" higher than the upper horizontal channel encompassing the lower lumber panel. The lumber panel is secured together by glue and counter-sunk wood screws in rear of door facias. Painting or staining door lumber portion is recommended. After curing, the lumber is fitted in to the gate frame and moisture drainage vents are installed. Two 6" Stainless Steel Tee Hinges, and one Super brand latch and all the installation fasteners for lumber are included with each gate purchased. The gate size is 47-1/2" width x 60" height and a finished opening width of 48" width is required for installation.

• DOORS ARRIVE UNPAINTED AND READY FOR YOUR FAVORITE COLOR APPLICATION
• SILHOUETTES are manufactured from 3/4" thick stock in one piece
• Completely Assembled
• Heavy gauge "non-rusting" ALUMINUM metal used throughout entire gate structure (except lumber)
• "Formed" Triple Bar Zephyr-Top on both sides and full width upper channel.
• Full height vertical channel materials both sides of door for maximum strength
• Concealed "weldments" at Zephyr-Top to channel area underside.
• Surrounded lumber fascias (channels protect all four edges of lumber panels)
• Outside posts capped with ALUMINUM plates (concealed weldments also)
• Painting or staining door lumber portion is recommended.
• 6" Stainless Steel Tee-Hinges with all necessary fasteners included for installation.
• Stainless Steel Hook & Eye Set (used to hold gate open) also available (additional fee).
• "Zinc-Plated" Superlatch and latching receiver plates and hardware included with all gossip gates.
• Smooth surface inside door panel
• All lumber secured with glue and countersunk wood screws on rear panels.

Share this page, click URL below to copy link:

https://www.armourhorsestalls.com/product/gossip-gate-wind-jump-47-1-2-w-x-60-h/