Package Details:
Aron Stall Front Package
Product Number: ARONPKG18
Size: 216" Wide
The 216" Wide x 96" High Aron Stall Package Includes:
Sliding Stall Door - Coolbreeze Gossip Top with Scuff Panel (Other Door Top Styles Available)
Stall Front Grill
Heavy Duty Hardware Set
Trim Package Option
Stall Door Details for Default Coolbreeze Gossip Top with Scuff Panel:
- Door Product Number: CWSPGGSD5WOWOOD
- Fully Welded Coolbreeze Door Assembly with Scuff Bottom Allows More Airflow
- Gossip Top allows equine to socialize or view aisle way
- Three 1" Diameter Curved Bars
- Close 1" Between Bar Spacing in Lower Door Area
- Load Lumber (not included) from Bottom
- Bottom Cap Channel Included for Finished Appearance
- Door Size is 51-1/2" Wide x 96" High
- Recommended door opening: 48" Wide (or narrower) x 97-1/2" High (Need a custom size? Call us!)
- Recommended header: 7-1/2" Header above the door opening (Header used to mount the door track. If you don't have room, please call us and we will accommodate your situation!)
- Six Other Door Top Styles are Available to Select From (additional cost apply)
- 8'0" Galvanized Self Cleaning Round Track (5 fasteners included)
- Neoprene Ball Bearing Trolley Pair
- Two Aluminum Door Stops (4 fasteners included)
- Zinc Plated Slide Bolt Super Latch (fasteners included)
- Heavy Duty Adjustable Stay Roller (fasteners included)
- Assembled Grill (Nothing to put together!)
- Concealed Welds for a clean, finished appearance!
- Fasteners Included for Lumber Barn Installation
- 1" Diameter Round Pickets
- 3" Between Bar Spacing
- Grills Over 96" Will Arrive in Two Sections
- Mounting Holes on Horizontal for Attachment
- L or C Series Stall Grills with (Angle or Channel)
- Different width/length options to choose
- Special Length Grill Sizes Free by calling 800-876-7706
- Lower Wall Lumber Not Included
- The Feeder Access Door: The Hinge-less, Latch-less, "Built In" Feeder Access Door: Lift Up and Swing to Open, Lift Up and Lower to Close. The "built in" door is unnoticeable at first glance and lends itself to giving your barn a continuous and uncluttered whole aisle appearance!
- The Lift Out Panel: A completely removable section of Grill, within the stall front Grill, that allows your horse to hang it's head into the aisle. It can be used to feed through as well! The Lift Out Panel is ALSO unnoticeable at first glance and lends itself to giving your barn a continuous and uncluttered whole aisle appearance!
- The Cut Out Feeder Access is an 11" x 11" opening in the stall front Grill used to access horse feed bucket or bowl.
- The EZ Lift Feeder Access is the same 11" x 11" opening as the Cut Out Feeder Access but the EZ feature includes a "lift up, lower down" door for accessing the feeding container.
- Four 7-1/2" Header Channels hold the header in place above the stall door and stall grill.
- Two Receiver Channels: Receiver Channel are two individual channels that are NOT welded or connected to the stall grill, but are separately mounted, below where you intend to place the stall grill. Receiver Channels mount vertically to the stall end posts and, once affixed, horizontal 1-1/2" lumber can be inserted into the receiver channels to construct the stall's front wall.
- Bottom Angle Trim: finishes off the bottom of the lumber wall. And is for aesthetic purposes only.
- Fasteners are included.
- Three 6" x 6" x 12'0" posts (One post at each stall end and one 4' over from one end. When you plan for multiple stalls, please remember, stalls that are side by side will share a common post!)
- Nine 2" x 6" x 168" boards (stall front wall)
- Five 2" x 6" x 48" boards (kick panel in stall door)
- One 2" x 8" x 216" board (header)
Share this page, click URL below to copy link:
https://www.armourhorsestalls.com/product/aron-stall-front-package-216-wide/