Package Details:
Sliding Tack Room Door with Jumper Design
Product Number: TRNSSWJ5
Size: 51-1/2" wide x 96" height for sliding applications
The Tack Room Door is perfect for feed or tack rooms and names can be changed or added to accommodate one or both rooms. This door arrives at the height and width chosen above and be sure your finished opening measurements are the size of the "opening measurement" noted above for the corresponding door size you have chosen. The jumping horse silhouette is shown, but many other designs are available here. Additional cost for changed artwork may apply. Tack Room Doors are completely assembled, nothing to assemble! All the necessary fasteners for installation into lumber and hardware is included. Doors arrive complete with one self cleaning galvanized overhead round 8'0" track, two ball bearing trolleys, two custom aluminum stops, one zinc plated Super latch, latch receiver plates, one neoprene adjustable stay roller and detailed installation instructions.
Heavy gauge non-rusting ALUMINUM is used throughout the hinged or sliding door structure, except where lumber is shown. Hinged doors use aluminum of at least 1/8" quality thickness, no thin material is used in the construction of this door. Cleanest looking appearance in the stall manufacturing industry, the lumber panels are surrounded and protected on all four edges of lumber insert by aluminum no rust channeling. Door arrives unpainted and painting the lumber portion is recommended to preserve the lumber. The opposite side of the door is smooth with countersunk screw placements.
This uniquely crafted sliding tack room door is manufactured to fit over your 48" wide by 97-1/2" high door opening and a 7-1/2" header above your 96" opening is necessary for the track to mount. Custom Sizes Available.
- Different Sizes and Designs are Available
- Farm Names or Titles can also be added!
- Completely Assembled Door
- Two back to back Panels of 5 layered, 3/4" thick lumber
- Bonded with glue and wood screws at back of doors.
- Smooth surface on opposite side of door
- Wood screws installed counter sunk in critical areas for additional strength.
- All Edges surrounded with heavy gauge "non-rusting" Miter-Cut ALUMINUM channeling
- Painting or staining door lumber portion is recommended.
- All door hardware included
- Zinc-Plated Super latch and latching receiver plates
Share this page, click URL below to copy link:
https://www.armourhorsestalls.com/product/tack-feed-barn-door-sliding-jumper/