Package Details:
Horse Stall Grill
Product Number: U2G3HX12-6W
Size: 150" Length x 36" High with 2" Between Bar Spacing
Any Length Available!
Understanding L Series Grill vs. C Series Grill:
L Series Stall Grill attach to 1-1/2" lumber at the top and bottom horizontal area of the Grill. The opening measurement to install this Grill needs to be 36" high (or tall) by whatever length you choose above. Fasteners are provided for installation.
C Series Stall Grill attach to any surface of 1-3/4" wide or wider. The component is fastened to your 1-3/4" or wider surface at the top and bottom horizontal area of the Grill. The opening measurement to install this Grill needs to be 36-1/8" high (or tall) by whatever length (plus 1/8 of an inch) you choose. Fasteners are NOT provided with C Series Grill.
If you desire a Grill size that you don't see listed, please call us. We do custom size Grills!
Stall Grills can be placed in the stall front, window area, or between two stalls as a dividing Grill or partition. Stall Grills are assembled using 1" diameter round vertical bars with 1" between bar spacing and arrive welded as one (96" or less) or two pieces (when you order 96-1/8" length Grill or larger). Predrilled fastener holes are provided for quick and easy installation.
- Stall Front Grill are placed in the stall front between the stall door and end post or the end wall and they fit vertically below the stall header and above the stall front wall. Most Stall Front Grill have a Feeder Access Door, which is a section of the stall bars that opens up and allows you to throw your feed through and into the stall occupant's feeder. Feeders can be mounted on the lower stall wall below the Feeder Access Door and feeders can be ordered.. Lift Out Panels, Feed Cut Out, and EZ-Lift Openings are also available. View these product options by clicking the small thumbnail photos under the main product picture above.
- Stall Window Grill are usually placed in the stall's window area, if you plan to equip your stalls with window openings. Some stalls have a window opening, in addition to, or instead of a Dutch door, in the back of each stall to increase airflow, visualization or visitation.
- Stall Dividing Grill are the bar (or Grill) section that can be installed between two stalls. Dividing Grill are also used to increase airflow, visualization and/or visitation throughout the barn. If you have an existing stall dividing wall that is 1-3/4" thick or larger (or plan to build one) then the C Series Grill is the correct product for your barn! If you plan to install a removable "foaling wall" between two stalls. Then consider using our L Series Grill with Receiver Channels.