Armour Blog Aluminum horse stalls

Double-Dutch Doors

Share
Armour Horse Stalls March 4th, 2012

Since barn building has been in existence, the popularity of Double Dutch Doors has remained steadfast. The “X” design, also called a Crossbuck, originated when corner to corner bracing was necessary to prevent sagging since the horizontal lumber planks utilized to make the door had to be secured. Cross bracing was performed to insure the doors would be functional and not drag the ground when opened or shut. Originally, and in some cases even today there are doors which are manufactured with only one corner to corner brace which usually is installed on the hinge side top to the lower opposite side. Cosmetically, another two separate board cross brace was often installed on the fascia going in the opposite direction forming an “X. This three individually pieced “X” did little to brace the horizontal planking from sagging and merely added to the appearance of the doors.

 

For years Armour Companies has set the pace in the design and manufacturing of single and double Dutch doors expanding on the ever popular Crossbuck theme through innovative construction techniques. By integrating Armour’s dual-panel, structural integrity has increased, while retaining the Crossbuck appearance that most barn owners identify as a traditional looking barn door. Armour’s CBHD1single and double Dutch doors feature a two panel process of laminate sheets exterior grade (seven ply) which are cut to heights and widths and then bound together with fasteners for maximum strength. Once fastened together, the panel is then surrounded at the top, bottoms, and sides with miter cornered aluminum extrusions for protection of the lumber door edges also providing a professional and cosmetic appearance throughout. This process absolutely eliminates the “sag factor” that you would find in a traditional, pieced together, Dutch door on the market.

Armour offers a hinged Double Dutch Door with individually opening and closing upper and lower panels as well as, a “Not Split” version for those that desire the look of a Dutch door but only want one solid swinging door panel. Armour also offers the not split version as a sliding door which is typically used in the tack and or feed room. Not split doors can be used as bathroom, office, or bedroom doors. They can be used just about in any location in your home, office or barn if a barn or stable appearance is desired. Also two Crossbuck Double Dutch Not Split doors (available in hinged or sliding) can be doubled and used for a larger end barn door opening.

Due to our special CNC capabilities, Armour is able to offer a personalized style door with silhouettes or etched designer fascias. Lumber areas can be cut out, or removed, and hundreds of western, polo, hunter jumper and dressage artwork silhouettes are available to choose from. Horse names, farm names or logos can also be etched into the lumber doors, so if you have a special idea, please let us know!

Save Your Green!
Receive 3% off all Miniature Horse Stall Hinged Gates.
MENTION COUPON CODE: 3OFFMINI
(special ends 3/30/12)

Armour currently has 4-6 sets of T&G Double Swing Shutters that are available for a reduced cost of $300.00 per set, includes hinges and latches. Please call if interested.
CALL ARMOUR COMPANIES TODAY: 800-876-7706

Toll-Free 800.876.7706
Fax 386.740.9077